Mejor vendido

Polygem - 307 FR LITE II - Epoxi ignífugo para esculpir

307 FR LITE II™ es un sistema epóxico ligero de dos componentes, aplicable con llana, con clasificación de resistencia al fuego E-84 Clase A y apto para espacios públicos. Su fórmula tiene una consistencia pastosa y fácil de mezclar, y se utiliza comúnmente para fabricación general, recubrimiento, escultura, parcheo, relleno, unión y reparación. No contiene COV ni solventes.

Bulk pricing on 10 gallon kits

Order 32 or more 10 gallon kits of the 307 FR Lite II and pay $625 per kit. You'll see your discount once you've added the kits to the cart.

This Item Ships Ground Only

Some of our products can literally take your breath away—which means they can’t take to the skies. This item is considered hazardous and must ship via ground only. Express and air delivery services are not available. It may take a little longer, but we’ll make sure it arrives safe and sound.

Shipping and Returns

Shipping calculated at checkout. Rates vary by weight, size, and destination.

This product typically ships same day if ordered by 11am Eastern. You will receive a notification when your order has shipped. FedEx is our shipping partner for ground and express shipments.

You can return your unopened product up to 30 days after receiving your order. We're not able to accept returns on custom tinted products.

Material Safety and Tech Data Sheets

Learn more

Product Specification

307FR LITE II™ is a lightweight 2-component trowelable epoxy system that is E-84 Class A Flame-Rated and public space safe- It is formulated to an easy-to-mix
“paste-like” consistency that is commonly used for general fabrication, coating, sculpting patching, filling, joining, and repair. It contains no VOC’s and is solvent-free. 307FR LITE II cures to a hard, strong, durable material suitable for interior and exterior public spaces and themed environments.

SURFACE PREPARATION

307FR LITE II bonds to many materials including metals, wood, fiberglass, concrete, PVC, Plexiglas™ (acrylic), plastics, foams, including EPS, lathing and glass.

NOTE: 307FR LITE II DOES NOT BOND to silicone, polyethylene, polypropylene, or plastic wrap.

Prepare Your Substrate/Surface –

If applying to smooth surfaces such as metals, plastics, glass, etc., surface may be roughened with sandpaper (120 grit) to aid adhesion. Clean surface thoroughly to ensure it is free of dust, oils, release agents, etc.

For Metal Substrates– Abrade the surface to a white metal finish, then wipe down and clean it thoroughly. Apply a fiberglass sheet saturated in a laminating epoxy
to the surface. When possible wrap the sheet around the substrate to ensure a good mechanical bond before applying 307FR LITE II.

APPLICATION

Recommended minimum thickness is ¼ in (6.35 mm).

Measure & Mix– After pre-mixing Parts A and B, measure out equal parts 1A:1B by volume. Combine and mix material thoroughly until “streak free”. Large volumes
can be mixed on a flat surface using two trowels. DO NOT mix more than can be applied within the working time of 60 minutes.

When using with Polygem 307 Thickener –First, thoroughly coat gloves and working area with Polygem 307 Thickener to prevent sticking. Knead Parts A & B together while folding small amounts of powder into the mixture. The amount of powder to add depends on the desired working consistency. Continue to fold mixture repeatedly until it is streak-free.

Application: Trowel or spread by gloved hand onto your substrate. DO NOT apply to a surface that is less than 60 °F (16 °C).

WORKING TIME - MATERIAL IS MASS SENSITIVE. More Mass = Less Time to Work. Apply and spread quickly to achieve the maximum working time. Temperatures above 73 °F (23 °C) will reduce working time.

Polygem - 307 FR LITE II - Epoxi ignífugo para esculpir

Choose your location

enter a US zip code

Product Specification

You may also like