Axalta - Tufcote Hydro 1201 Negro brillante

Axalta - Tufcote Hydro 1201 Negro brillante

Tufcote Hydro 2.1 HG es un esmalte de secado rápido y bajo en COV, a base de resina acrílica de alta calidad, con excelentes propiedades de adhesión a una amplia variedad de sustratos metálicos y productos de madera. Al secar, este producto deja una superficie lisa y dura. Se puede aplicar con brocha, rodillo o pistola.

Choose your location

enter a US zip code

Más información

Especificación del producto

Tufcote Hydro 2.1 HG is a low VOC, quick-dry enamel based on high quality acrylic resin with excellent adhesion properties to a wide variety of metal substrates and wood products. This product dries to a smooth and hard surface. It may be applied by brush, roller or spray.

Works well as an economy coating on properly prepared, metal and wood where the following attributes are desired:

  • Fast drying
  • Good flexibility
  • Outstanding adhesion
  • Easy application
  • Non-flammable
  • Water reducible
  • Meets clean air standards

SURFACE PREPARATION

Surface must be free of oil, grease, dirt, wax, silicone, powdery or scaling rust, lose or peeling paint and all other foreign matter. Smooth slick surfaces should be sanded to promote adhesion. Prime bare and uncoated surfaces with one of the following Tufcote primers: Tufcote Hydro 2.1 PR (1200 waterborne series), Tufcote LV PR (4400 series) or Tufcote Hydro LV PR (7900 waterborne series).

METAL SURFACES:
Aluminum surfaces should be properly treated. Surface preparations may include sanding, brush off blasting (SSPC-SP7), Alodine treatment, treatment with an acid, or other preparation necessary to ensure adhesion. All aluminums are not alike, it is strongly suggested that adhesion testing be done to assure system robustness.

Galvanized steel surface preparation may include detergent washing, pre- treatment and abrasion for new surfaces; for weathered surfaces, detergent washing and sanding. For new galvanized surfaces, acid treatments, degreasing and abrasion might be required before application of appropriate primer.

PAINTED SURFACES: Be sure all loose and peeling paint is completely removed, and the surface is clean. Remove excess chalkiness with a wire brush or by sanding. Feather edge and spot prime with Tufcote Primer.

WOOD SURFACES: Clean wood thoroughly. Prime and seal with one coat of Tufcote Primer or Tufcote Hydro (tinted close to finish color, if desired).

APPLICATION

Apply 2 coats, 1 to 2 hours apart, if possible, using conventional application methods
and equipment.

También te puede interesar

Décadas de experiencia

Desde 1993, nos hemos dedicado a ofrecer productos de alta calidad y un servicio excepcional.

Envío rápido

Los artículos en stock se envían el mismo día si se compran antes de las 11 a. m., hora del Este.

Servicio al cliente

Estamos aquí de lunes a viernes, de 8 a. m. a 5 p. m., para ayudarlo con su pedido y responder cualquier pregunta.

Pago seguro

Utilizamos un sistema encriptado, compatible con PCI y con protección contra fraude para mantener sus transacciones seguras.