Gemini - EVO Eclipse - White Topcoat


ECLIPSE, is a technologically advanced waterborne topcoat for interior woodwork that functions both as a topcoat and tint base. It exhibits excellent durability as a single pack product, and ECLIPSE’s dual cross-linking technology gives the finisher the ability to further increase durability and chemical resistance by adding an optional hardener.

Custom colors available.

Choose your location

enter a zip or postal code

Más información

Especificación del producto

ECLIPSE White and Clear, are technologically advanced waterborne topcoats for interior woodwork that functions both as a topcoats and tint bases. They exhibit excellent durability as single pack products, and ECLIPSE’s dual cross-linking technology gives the finisher the ability to further increase durability and chemical resistance by adding an optional hardener. Uses: Kitchen and bathroom cabinetry, architectural millwork, furniture, and shutters. For wood substrates only. For interior use only.

SURFACE PREPARATION

New Wood: Remove any dirt, grease, glue or other contaminants. Moisture content of wood should be 7-9%. Sand to 150-180 grit. Proper sanding of wood is absolutely critical to achieve the best color development and adhesion of the coating to the substrate.

Old wood/re-finishing: Best practice is to strip old finishes completely and remove all contaminants from the surface. For previously finished surfaces such as old lacquer, good results can be obtained following this procedure-Degrease, clean, and dry surface. Sand with 220-280 grit sandpaper and clean or blow off sanding dust. Apply new finish. Test sample for adhesion and compatibility before proceeding with more expansive work.

APPLICATION

Using conventional, HVLP, airless, or air assisted equipment, apply this product at 3-4 wet mils per coat. Let dry a minimum of 60 minutes. Sand with 280-320 grit, no-fill sandpaper and remove sanding dust with clean compressed air. This product must be sanded in between coats to ensure proper adhesion.