Maestros modernos: Primers de tonos fríos y cálidos
Maestros modernos: Primers de tonos fríos y cálidos

Maestros modernos: Primers de tonos fríos y cálidos

Metallic Paint Primer is an ideal primer and foundation color for Metallic Paints. This unique interior/exterior primer promotes adhesion or smooth surfaces, dries fast and is immediately sandable when dry. Use the Cool Tone Primer (Gray) under Silver and Pewter Metallic colors. Use the Warm Tone Primer (Beige) for Gold and Copper Metallic colors.

Choose your location

enter a US zip code

Más información

Especificación del producto

Modern Masters® Metallic Paint Primer is an ideal primer and foundation color for Modern Masters’ Metallic Paint Collection and Exterior Metallic Paints. It promotes adhesion on smooth surfaces, dries fast and is immediately sandable when dry. It also provides excellent stain-blocking power and can tolerate a caustic substrate level of pH 13. Use Cool Tone Primer under Silver and Pewter Metallic colors. For Gold and Copper Metallic colors, use Modern Masters Warm Tone Primer.

Metallic Paint Primer is suitable for concrete, masonry, nonferrous metal, galvanized steel, plastic, wallboard, wood, plaster, stucco, and previously coated surfaces. It can be used for both interior and exterior applications.

SURFACE PREPARATION

ALL SURFACES: Remove dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent or other suitable cleaner. Rinse
thoroughly with fresh water and allow to fully dry. If any mold or mildew is present on the surface clean further with one quart of household bleach added to a gallon of water. Rinse with clean water. Severely mildewed areas should be cleaned with a chlorinated cleansing powder and thoroughly rinsed with water. All surfaces must be dry at time of application.

GALVANIZED STEEL: New galvanized steel should be solvent cleansed to remove all post galvanizing treatments such as oil, grease or wax. Old or existing galvanized steel should be thoroughly washed to remove all surface contaminates.

CONCRETE AND MASONRY: Hand or power tool clean to remove all loose or unsound concrete, masonry, or previous coating. Very dense, non-porous, concrete should be acid etched or abrasive blasted to remove the laitance layer and create a surface profile. Allow new concrete to cure for 30 days before coating.

PREVIOUSLY COATED: Previously coated surfaces must be sound and in good condition. Smooth, hard or glossy finishes should be scarified by sanding to create a surface profile.

APPLICATION

Mix thoroughly. Product is formulated to be used as is. Apply only when air and surface temperatures are between 50-90°F (10-32°C), the relative humidity is no greater than 85% and surface is at least 5°F (3°C) above dew point. Dry times may be effected by extreme high or low relative humidity. Ensure fresh air entry during application and when drying.

BRUSHING: Use a high quality synthetic bristle brush.

ROLLING: Use a high quality low nap roller.

SPRAYING: Air –Atomized Spray (pressure feed only): Fluid tip – 0.055-0.070, Fluid Delivery – 10-16 oz./min, Atomizing Pressure – 25-60 psi. Airless Spray: Fluid
Pressure – 1800-3000 psi, Fluid Tip – 0.013-0.017, Filter Mesh 100.

También te puede interesar

Décadas de experiencia

Desde 1993, nos hemos dedicado a ofrecer productos de alta calidad y un servicio excepcional.

Envío rápido

Los artículos en stock se envían el mismo día si se compran antes de las 11 a. m., hora del Este.

Servicio al cliente

Estamos aquí de lunes a viernes, de 8 a. m. a 5 p. m., para ayudarlo con su pedido y responder cualquier pregunta.

Pago seguro

Utilizamos un sistema encriptado, compatible con PCI y con protección contra fraude para mantener sus transacciones seguras.