Maestros modernos - Efectos metálicos - Permacoat Xtreme
Maestros modernos - Efectos metálicos - Permacoat Xtreme

Maestros modernos - Efectos metálicos - Permacoat Xtreme

Un sellador y capa superior protector todo en uno, a base de agua, 100 % acrílico, transparente y que no amarillea, diseñado para funcionar sobre las pinturas reactivas Metal Effects.

Choose your location

enter a US zip code

Más información

Especificación del producto

This innovative clear coat chemically arrests the oxidized metal finish, minimizing any further corrosion, and then self-crosslinks to create a weather resistant barrier. Permacoat Xtreme is highly recommended to seal the Metal Effects Rust finish on interior areas where there may be contact to prevent rub-off and exterior applications to prevent runoff of the finish onto surrounding surfaces. Unlike other acrylic varnishes, Permacoat Xtreme will form a film over the oxidized surfaces without cracking or yellowing. Permacoat Xtreme is pH balanced to minimize the rust colors tendency to deepen in color tone when using other non-recommended clear coats.

APPLICATION

The rusted finish must be fully cured prior to application (min. 24 hours). Make sure that the air, surface, and product are all above 55°F and at least 5°F above the dew point before applying. Avoid applying this product if rain or snow is expected in 72 hours or if the temperature is expected to drop below 55°F within 72 hours. Permacoat Xtreme can be brushed, rolled or spray applied. Brushing: Use a high quality synthetic bristle brush. Rolling: Use a high quality short-nap varnish roller. Spraying: Use a HVLP gun, conventional cup gun or airless spray system.

First coat: Add equal parts of Permacoat Xtreme with water and stir well before applying.

Second coat: Apply Permacoat Xtreme at full strength. Maximum two coats and dry film thickness of 2.0 mils is recommended.

DO NOT USE OTHER SEALERS OR VARNISHES.

Always test a similar surface before applying to your project. Do not apply in temperatures below 55°F/13°C or above 95°F/35°C.

Taping – Use high quality, low-tack tape when taping over surfaces that have been previously painted with Metallic Paint. When painting over taped-off areas be aware that Metallic Paints exhibit poor early adhesion properties and are elastomeric (they stretch) before curing. Consider cutting along the tape edge with a razor blade to avoid delaminating the fresh paint from the substrate.

DRY & RECOAT

Dry to touch in 30 minutes. Recoat time is approximately 1 hour. Full cure time is 7 to 10 days. (Drying times were recorded at 70°F and 50%RH)

Note: Lower temperature and/or higher humidity will lengthen the dry and cure times.

También te puede interesar

Décadas de experiencia

Desde 1993, nos hemos dedicado a ofrecer productos de alta calidad y un servicio excepcional.

Envío rápido

Los artículos en stock se envían el mismo día si se compran antes de las 11 a. m., hora del Este.

Servicio al cliente

Estamos aquí de lunes a viernes, de 8 a. m. a 5 p. m., para ayudarlo con su pedido y responder cualquier pregunta.

Pago seguro

Utilizamos un sistema encriptado, compatible con PCI y con protección contra fraude para mantener sus transacciones seguras.