Maestros modernos - Efectos metálicos - Primer


Una imprimación acrílica única a base de agua formulada para usarse debajo de los sistemas reactivos Metal Effects.

Choose your location

enter a US zip code

Más información

Especificación del producto

Modern Masters® Metal Effects® Primer is a unique waterbased acrylic primer. Unlike other primers, it is especially formulated to block Metal Effects Patina Aging Solutions and Activators from reaching the metal, wood, or reactive
substrate. This helps prevent the formation of rust or other oxidation products from forming under the paint film. Metal Effects Primer will also block out alkali salts, tannins, acid salts, or other unwanted contaminates from ‘bleeding through’ to the Metal Effects Oxidizing Metallic Paint (Bronze, Copper, Iron) film and causing adverse reactions and unwanted color changes in the oxidized finish.

Popular applications range from full interior and exterior walls, moldings, trim, columns, doors, railings, to lamps, vases, and planters.

Some metal surfaces, such as bare aluminum, galvanized metal, or rusted or slag metals, will need a specialty primer from our compatible primer list, applied prior to the application of Metal Effects Primer. If this is the case, read the specific information for the recommended primer prior to beginning your project.

SURFACE PREPARATION

ALL SURFACES: Remove all loose, peeling paint. Patch and repair any surface imperfections before using the Metal Effects Primer. All surfaces should be sound, clean and free of oil, grease, wax, and other contaminants, and completely dry prior to priming. Surfaces previously primed require light sanding. Scuff sand any glossy surfaces. If unsure of the substrate, test a sample area to ensure the desired results.

APPLICATION

Modern Masters Metal Effects Primer can be brushed, rolled, or spray applied. (See specific equipment requirements under Spraying) Always test the product in a small, inconspicuous area before beginning a project. The primer should be mixed thoroughly before using. Apply a minimum of two coats. Wait at least 12 hours before applying Metal Effects Oxidizing Paints (Bronze, Copper, Iron).

Do not apply in temperatures below 55°F/13°C or above 95°F/35°C.

BRUSHING: Use a high-quality brush recommended for water base primer.

ROLLING: To roll Metal Effects Primer use a high quality 3/8” nap roller.

SPRAY: The Metal Effects Primer can be spray applied using airless spray equipment or HVLP.

Taping: Use high quality, low-tack tape when taping over surfaces that have been previously painted.