Antiguos Maestros - Armadura de Maestros

Antiguos Maestros - Armadura de Maestros

El acabado transparente a base de agua para interiores Masters Armor proporcionará un hermoso acabado transparente utilizando tecnología de vanguardia.

Choose your location

enter a zip or postal code

Más información

Especificación del producto

Protect interior wood projects like woodwork, furniture and more, and add natural beauty with Minwax Polycrylic Protective Finish. Ultra-fast-drying protective coating allows for quick recoats after 2 hours. Easy to clean-up the clear wood finish with soap & water.

  • Minwax Polycrylic Protective Finish protects and adds beauty to interior wood projects, including woodwork, furniture, doors and cabinets
  • Clear top coat protects against scratches, spills, dirt and more
  • Crystal clear finish ideal for use over all Minwax Oil-Based and Water-Based Stains and colors
  • For use on all wood species including light woods like maple, ash and birch
  • Water-based wood finish allows for easy soap and water clean-up
  • Non-yellowing, non-ambering and low odor

PREPARATION
  • Surface must be dry and free of wax, grease, polish, old finishes in poor condition or any foreign matter.
  • Sand to a smooth, uniform surface. DO NOT USE STEEL WOOL. Remove dust with a damp cloth. Let dry completely.
  • If desired, apply stain such as Minwax Water Based Wood Stain or Minwax Wood Finish™ stain to bare wood surfaces following label directions. Wait at least 24 hours before applying Polycrylic Finish over Minwax® Wood Finish Stain.
APPLICATION
  • Stir well before and regularly during use. DO NOT SHAKE. FINISH APPEARS MILKY IN CAN, BUT DRIES CRYSTAL CLEAR.
  • Apply a thin coat of Polycrylic Finish with a high-quality, synthetic bristle brush. Apply in the direction of the wood grain. Do not overbrush.
  • Let dry at least 2 hours, then sand with very fine sandpaper (220 grit) to ensure an even finish and proper adhesion of additional coats. Do not use steel wool. Remove all dust.
  • Apply a second coat. For additional coats, repeat Step 6 before applying. Three coats are recommended.
  • After final coat, allow 3 hours before light handling and 24 hours before normal use.
  • Special Instructions: Polycrylic Finish should not be applied over red mahogany stains. Instead, use Minwax Fast-Drying Polyurethane or Minwax Water Based Oil-Modified Polyurethane over any red mahogany stain.
  • Special Instructions: Polycrylic Finish is not recommended for use on floors because it would require more frequent recoating in high-traffic areas. Instead, we recommend any Minwax polyurethane, including Minwax Water Based Oil-Modified Polyurethane or Minwax Ultimate Floor Finish for maximum durability.

También te puede interesar

Décadas de experiencia

Desde 1993, nos hemos dedicado a ofrecer productos de alta calidad y un servicio excepcional.

Envío rápido

Los artículos en stock se envían el mismo día si se compran antes de las 11 a. m., hora del Este.

Servicio al cliente

Estamos aquí de lunes a viernes, de 8 a. m. a 5 p. m., para ayudarlo con su pedido y responder cualquier pregunta.

Pago seguro

Utilizamos un sistema encriptado, compatible con PCI y con protección contra fraude para mantener sus transacciones seguras.