Rust-Oleum - Noxyde

Recubrimiento elastomérico acrílico a base de agua, de un solo componente y con capacidad preventiva contra la oxidación.

Shipping and Returns

Shipping calculated at checkout. Rates vary by weight, size, and destination.

This product is drop shipped directly from Rust-Oleum’s warehouse in Illinois. Orders generally require 2–4 business days for processing before shipment.

As this item ships from the manufacturer, it may arrive separately from other products in your order.

Returns are accepted within 30 days if the product is unopened and in original condition. Customers are responsible for return shipping unless the item arrived damaged or there was an error with the order.

For drop shipped items like this, please contact us before returning so we can provide the proper return instructions.

Material Safety and Tech Data Sheets

Learn more

Product Specification

Noxyde Elastomeric Acrylic Coating is a high-performance, high-build, rust-preventative, water-based coating. Noxyde is self-priming and designed for marginally prepared, soundrusted, or clean steel in mild to moderate industrial
environments. It can also be used on concrete and has excellent elongation properties of 200% making it suitable for bridging small cracks. This single component coating resists corrosion, rust, and water even in severe marine
environments. Can be top coated with multiple Rust-Oleum High Performance products for an extended service life for your assets.

SURFACE PREPARATION

Remove all dirt, grease, oil, salt, or other contaminants by washing the surface with Krud Kutter® PRO Cleaner Degreaser, detergent, or other suitable cleaner per
Solvent Cleaning Standard (SSPC-SP1). Rinse thoroughly with fresh water and allow to fully dry. Thoroughly cured, hard or glossy previous coatings which are very smooth may require scuff sanding to maximize adhesion.

APPLICATION

Apply only when air and surface temperatures are between 45-130°F (7-55°C) and surface is at least 5°F (3°C) above dew point. The relative humidity should not be greater than 80%. The published recoat time may be extended when the
relative humidity is greater than 70%. A minimum of two coats are required for a total minimum dry film thickness of 14 mils, (350μ). Apply two coats alternating color between coats to ensure complete hide and coverage.

NOTE: For best results, Noxyde must be airless spray applied.

See technical data sheet for equipment recommendations.

Rust-Oleum - Noxyde

Product Specification

You may also like