Smith Paints - Pared de color

The surface preparation phase should be viewed as the most important. Proper preparation results in the stains longevity, minimizes potential failures and creates the best environment for an aesthetically pleasing work of art. In short, the more detail and time allotted to this phase of the project will dramatically affect the
appearance and durability of the finished surface.

The surface must be free of all foreign materials that would inhibit the absorption of Smith’s Color Wall stain. Foreign materials include, but are not limited to grease, dirt, glue, previous coatings, and sealer.

Do not use an acid etch as a cleaning method.

Smith’s Color Wall is supplied as a concentrate. The recommended dilution ratio
is 1 part concentrate to 4 parts distilled, deionized or reverse osmosis water. Concentrate will result in ready to use stain by simply stirring mixture. For
application to concrete, Smith’s Base Boost should be used to increase product adhesion and durability. Review Smith’s Base Boost product information for
dilution ratios and application instructions.

Application Method: To achieve a natural variegate appearance, Smith’s Color Wall should be applied by creating a mist via an airless sprayer, High Volume Low
Pressure (HVLP) sprayer, production gun, pump sprayer or trigger spray bottle. A variegated or natural finish is achieved through the various absorbencies of the
surface material as well as the accumulation of the color pigments. Roller application methods force absorption resulting in mechanical lines

Brush/Sea Sponge Application: For application areas where coverage and product control is warranted, apply Smith’s Color Wall with a sea sponge or traditional bristle brush (e.g. corners and faux finishes). Using this method of application may result in the appearance of mechanical lines.

Secondary/Highlight Color: To achieve increased color depth or mottled appearance. A secondary or highlight coat can be applied as soon as initial Smith’s
Color Wall color is dry to the touch (approximately 15 minutes).

Immediately clean up work area and tools with water while stains are still wet.