Richard's Paint - Paver Sealer

• Solvent Acrylic Formula
• Penetrates & Seals
• Moisture Resistant
• Stain Resistant
• Excellent Coverage
• Excellent Durability
• Excellent Wear Resistance
• Easy To Apply

The entire surface area to be painted should be clean, dry, sound, and free from
dirt, grease, oils, waxes, mildew, mill scale, form release agents, curing compounds, and any other surface contaminants that may adversely affect the performance of this coating material.

Richard’s Paver Seal Clear Sealer/Finish may be easily applied with a quality
brush, roller, or spray equipment as follows;

• Brush Application: When applying by brush, use a quality nylon or polyester bristle brush, or a quality combination of both, and apply a smooth and generous coat on smaller surface areas, such as cutting-in larger surfaces and painting trim.
• Roller Application: When applying by roller cover, use a quality smooth, medium or rough nap roller, depending on surface porosity, and apply an even and generous coat in a "W" or crisscross motion, avoiding any excessive respreading or reworking.
• Spray Application: When applying by airless sprayer equipment, use a unit with a minimum of 2000 psi of pressure, with a 0.013 - 0.015 fluid spray tip.
• DO NOT THIN

Clean up any minor spills and spatters immediately with Xylene, as well as all painting tools and airless equipment. More serious paint spills should be contained and removed with inert absorbent material. Dispose of contaminated absorbent, container, and unused contents in accordance with local, state and federal regulations.