Evercoat - Lite Weight

Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Surface must be thoroughly dry before repairing or applying material.

Keep the repair area small. Use 40-80 grit to remove the paint and featheredge.

Stir the filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle). Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 5-6 minutes @ 72°F (22°C)

Apply in layers with even firm pressure. Do not apply all at once.

Rough shape with 40 – 80 grit (as needed). Sand filler with 80 grit or finer. Final sand repair and paint edge 180 grit.