Evercoat - Metal Glaze

Two-part polyester finishing and blending putty. Extra-thin formula spreads smoothly. Easily fills grind marks, pinholes, uneven surfaces and other MetalWorks® body fillers and glazing putties to enhance their ease of working.

(1 tube of hardener included)

This Item Ships Ground Only

Some of our products can literally take your breath away—which means they can’t take to the skies. This item is considered hazardous and must ship via ground only. Express and air delivery services are not available. It may take a little longer, but we’ll make sure it arrives safe and sound.

Shipping and Returns

Shipping calculated at checkout. Rates vary by weight, size, and destination.

This product typically ships same day if ordered by 11am Eastern. You will receive a notification when your order has shipped. FedEx is our shipping partner for ground and express shipments.

You can return your unopened product up to 30 days after receiving your order. We're not able to accept returns on custom tinted products.

Material Safety and Tech Data Sheets

Learn more

Product Specification

Metal Glaze is a two-part polyester finishing and blending putty. It can be used independently or intermixed with other METALWORKS products to enhance the working properties for adapting to various temperatures and working conditions. It offers superior adhesion to galvanized metal, metal, aluminum, body filler, wood, fiberglass, catalyzed primers and aged/sanded OEM topcoats.

SURFACE PREPARATION

Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing. Use 80-180 grit to remove or scuff the paint and featheredge.

MIXING

Place the desired amount of material on a clean, non-fibrous surface. Knead the cream hardener before use. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” (10 cm) diameter puddle. Puddles larger than 4” in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 4 - 5 minutes @ 72°F (22°C).

Evercoat - Metal Glaze

Choose your location

enter a US zip code

Product Specification

You may also like