Evercoat - Rage


A premium lightweight body filler formulated with the finest resin available. Tack free and stain resistant, which extends the life of sandpaper and reduces the chance of staining.

(1 tube of hardener included)

Choose your location

enter a US zip code

Learn more

Product Specification

Rage® is a premium lightweight body filler formulated with premium resin.
Tack-free and stain resistant, Rage® extends the life of sandpaper and reduces
the chance of staining. Superior spreading and sanding properties eliminate the
need for cheese grating or sanding with coarse papers. Advanced formula with
ZNX-7™ provides superior adhesion to galvanized steel, aluminum, SMC and
sanded OEM finishes. Part of the METALWORKS® System.

SURFACE PREPARATION

Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing. Keep the repair area small. Use 80 grit to remove the paint and featheredge.

MIXING

Stir the filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle). Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 3-5 minutes @ 72°F (22°C)