Evercoat - Rage Gold


Exceptionally easy sanding body filler. Rage Gold also contains ZNX-7® for adhesion to galvanized steel and aluminum.

(1 tube of hardener included)

Choose your location

enter a US zip code

Learn more

Product Specification

RAGE® GOLD has unsurpassed sanding qualities attributed to Hattonite™, a
unique ingredient, which reduces heat and friction created by aggressive
sanding. RAGE® GOLD also contains ZNX-7™ for adhesion to galvanized steel
and aluminum. Can be used for cosmetic fiberglass and composite repairs. Stain
resistant for use with basecoat/clearcoat paints. Part of the METALWORKS®
System. Blue cream hardener included.

SURFACE PREPARATION

Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing. Keep the repair area small. Use 80 grit to remove the paint and featheredge.

MIXING

Stir the filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle). Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 3-5 minutes @ 72°F (22°C)