Bestseller

Firetect - WT-102 Flame Retardant


WT-102 Flame Retardant Coating is a Class A (Class 1) Non-Hazardous, Non-Toxic, Interior, LatexBased Flame Retardant Intumescent Coating For Application Over Raw Wood And Other Surfaces.

Learn more

Product Specification

WT-102 Flame Retardant Coating is a Class A (Class 1 and Class 2) Non-Hazardous, Non-Toxic, Flat Interior, Latex-Based Flame-Retardant Intumescent Coating for Application over Raw Wood, Closed Cell Polystyrene & Other Surfaces tested by a Certified Lab. WT-102 has excellent adhesion abilities.

APPLICATION

Before using, user must determine suitability of this product for its intended use.
• Prepare substrate by sanding and removing any dirt or coatings from surface just as you would prepare surface when using any other latex coating.
• Applicator must wear paint mask, goggles and gloves suitable for latex coatings.
• WT-102 must be mixed extremely well. Minimize contact with air as product dries fast.
• Luan: Class A or Class 1 at 125 sq. ft. per gallon, in 1 Coat or 15-16 wet mils.
• Doug Fir & Birch: Class A or Class 1 at 200 sq. ft. per gallon in two coats
• MDF: Class B or Class 2 at 150 sq. ft. per gallon in one coat
• Nylon Netting: NFPA 701 and CA Title 19 Roll application at 130 sq. ft. per gal. in two coats
• Closed Cell Polystyrene (EPS) Type 1 Closed Cell Foam Class B Apply with airless sprayer with a 415-spray tip, brush or ½” nap roller in 1 application at 22 wet mil thickness to all exposed areas.
• OEM Manufacturing for custom applications – contact manufacturer for specifics

CLEAN UP

Flush sprayer and/or equipment with water and wash hands with soap and water.