Users of this product must determine the suitability of this product for its intended use.
• Prepare substrate by sanding and removing any silicone or oil-based coating that may be on wood. WT-103 may not adhere to a surface that has not been properly prepared. Prepare surface the same way you would to apply other latex based coatings.
• Applicator must wear paint gloves, goggles and mask approved for latex coating applications.
• WT-103 must be mixed well.
• Apply WT-103 using an air, airless spray, brush or roller. Each gallon contains 100 square feet of usable product. Apply at the rate of 1 gallon per 200 square feet in two coats (1 gallon per 100 square feet). If using an airless, use a 15-17 size spray tip. Cover all exposed areas.
• Allow first coat to completely dry before applying second coat.
