Bestseller

Polygem - 307 LITE - Sculpting Epoxy

307 LITE is a 100% solids light-weight epoxy system specially formulated to a trowelable paste consistency for sculpturing and fabricating projects. 307 LITE will cure into an extremely strong and light-weight plastic that is easily sanded or shaped. 307 LITE can be tinted or painted and will even accept stains. 307 LITE bonds well to most surfaces including fiberglass, foams, metal, wood and concrete.

This Item Ships Ground Only

Some of our products can literally take your breath away—which means they can’t take to the skies. This item is considered hazardous and must ship via ground only. Express and air delivery services are not available. It may take a little longer, but we’ll make sure it arrives safe and sound.

Shipping and Returns

Shipping calculated at checkout. Rates vary by weight, size, and destination.

This product typically ships same day if ordered by 11am Eastern. You will receive a notification when your order has shipped. FedEx is our shipping partner for ground and express shipments.

You can return your unopened product up to 30 days after receiving your order. We're not able to accept returns on custom tinted products.

Material Safety and Tech Data Sheets

Learn more

Product Specification

307 LITE is a 100% solids light-weight epoxy system specially formulated to a trowelable paste consistency for sculpturing and fabricating projects. 307 LITE will cure into an extremely strong and light-weight plastic that is easily sanded or shaped. 307 LITE can be tinted or painted and will even accept stains. 307 LITE bonds well to most surfaces including fiberglass, foams, metal, wood and concrete.

307 LITE is solvent free so it won’t melt or dissolve foam surfaces. 307 LITE can be used as a sculpturing or texturing veneer over other surfaces and is thick enough for immediate embossing upon placement. 307 LITE is ideal for indoor or outdoor exhibit projects where strength and durability are desired. 307 LITE can also be used as a patching compound to repair broken or damaged exhibits. 307 LITE is the recommended formula for underwater applications.

PROPERTIES

Compressive Strength ASTM D-695 11,500 psi (min)
Tensile Strength ASTM D-638 2,100 psi (min)
Viscosity Thick paste
Mix Ratio 1:1
Pot Life 60 minutes @70°F
Cure Time 10-14 hours
Weight per Gallon 8.25 lbs.
Packaging 2, 10, and 100 Gallon Kits

MIXING INSTRUCTIONS

Thoroughly mix equal amounts of Part A and Part B by volume until streak free.
Wearing protective gloves, trowel or spread the 307 LITE and immediately
texture, emboss or finish as desired. Small amounts of water may be used to
help prevent the 307 LITE from sticking to the gloves. Do not apply 307 LITE
when ambient temperatures or surface temperatures are below 50 F.

Polygem - 307 LITE - Sculpting Epoxy

Choose your location

enter a US zip code

Product Specification

Customer Reviews

You may also like