Richard's Paint - Viper Acrylic Aliphatic Urethane

All surfaces must be clean and free of oil, grease, dirt, mildew, loose rust, mill scale, form release agents, curing compounds, deteriorated and poorly adhered coatings, efflorescence and any other surface contaminants.

300 - 400 sq. ft. per gallon

To touch: 30 min.

Recoat: 2 - 4 hours

Stir thoroughly in a spiral up and down motion before and during application to keep product completely mixed. For best results, it is recommended to apply two (2) finish coats.

• Brush Application: When applying by brush, use a quality natural bristle brush, and apply a smooth and generous coat on smaller surface areas, such as cutting-in larger surfaces and painting trim.
• Roller Application: When applying by roller cover, use a quality smooth to medium nap roller with a phenolic core, depending on surface texture and porosity. Apply an even and generous coat in a "W" or crisscross motion, avoiding any excessive respreading or reworking.
• Spray Application: When applying by airless spray equipment, use a unit with a minimum of 2000 psi pressure, with a 0.015 - 0.017 fluid spray tip.

Stir thoroughly and apply as it comes from the container. Thinning is not necessary. However, if thinning is required, you may add #2400-TH Brushing Thinner | #2420-TH Spraying Thinner. Do not exceed 5% by volume.

Clean up any minor spills and spatters immediately with 2400-TH Brushing Thinner, as well as all painting tools and airless equipment. More serious paint spills should be contained and removed with inert absorbent material. Dispose of contaminated absorbent, container, and unused contents in accordance with local,
state and federal regulations.