Ronan - Clear Acrylic Overcoat

Acrylic Clear Overcoat is a solvent based, fast drying, acrylic clear topcoat specially formulated to provide long lasting protection to painted surfaces. This coating is designed for use as a topcoat on painted signs and bulletins. Resists yellowing, oxidization, checking and cracking.

This Item Ships Ground Only

Some of our products can literally take your breath away—which means they can’t take to the skies. This item is considered hazardous and must ship via ground only. Express and air delivery services are not available. It may take a little longer, but we’ll make sure it arrives safe and sound.

Shipping and Returns

Shipping calculated at checkout. Rates vary by weight, size, and destination.

This product typically ships same day if ordered by 11am Eastern. You will receive a notification when your order has shipped. FedEx is our shipping partner for ground and express shipments.

You can return your unopened product up to 30 days after receiving your order. We're not able to accept returns on custom tinted products.

Material Safety and Tech Data Sheets

Learn more

Product Specification

Ronan Acrylic Clear Overcoat is a solvent based, fast-drying acrylic clear topcoat with UV-inhibitive additives that is specially formulated to provide long lasting protection over painted surfaces including signs, bulletins and sculptures. This coating resists yellowing, oxidation, checking and cracking. It is also ideal for
renewing faded signs.

Acrylic Clear Overcoat is not to be used on raw wood, vinyl, gold leaf or any surface which will come into contact with solvents or harsh cleaning agents. Before using Acrylic Clear Overcoat, a patch test is highly recommended to 1) Determine if Acrylic Clear Overcoat will cause cracking or lifting 2) Test adhesion and 3) Determine whether clear will provide the desired finish (it is especially important to test for clarity over dark colors and whites).

SURFACE PREPARATION

All surfaces must be clean, free from loose or peeling paint, grease, oil, dirt, rust, mill scale and other contaminants. If this procedure is not observed, the drying and adhesion of any coating will be adversely affected.

APPLICATION

Follow surface preparation instructions. Stir thoroughly before use. May be brushed, rolled or sprayed.

BRUSH: With any good quality bristle brush.

ROLLER: A foam or short nap roller will give the best results. Roll in one direction, rewet, then cross roll.

SPRAY: Apply by airless spray, conventional compressed air or HVLP spray system. Consult spray gun manufacturer’s guide for recommended fluid tip size and air pressure.

Ronan - Clear Acrylic Overcoat

Choose your location

enter a US zip code

Product Specification

You may also like