Rosco - Metallix

Satin

May be used straight out of the can or diluted with water (up to 16oz per gallon), Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create "glaze" effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.

Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.

Metallix paints can be applied via brush, roller or spray.

*Spray equipment specifications:

• Use a Conventional or HLVP cup gun with both air and liquid lines from a pressure pot and compressor
• Needle/Tip: 17/100 or 1.4mm
• PSI: 40
• Do not use an airless spray system

One US gallon of Metallix covers approximately 300 - 400 sq ft. Coverage varies depending on application technique, dilution, and number of layers.

Roughly four hours, depending on temperature, air movement, and humidity. If a second coat is desired, allow the first coat to dry for 6-8 hours beforehand.