Scofield - SelectSeal Plus


A high-solids, low-odor, self-crosslinking, urethane fortified acrylic sealer designed to protect interior or exterior bare or previously stained concrete

Learn more

Product Specification

SCOFIELD® SelectSeal™ Plus is a high-solids, low-odor, self-crosslinking, urethane fortified acrylic sealer designed to protect interior or exterior bare or colored concrete. It is an excellent sealer to use over LITHOCHROME® TinturaTM Stain, LITHOCHROME® Chemstain® Classic, LITHOCHROME® Color Hardener,
SCOFIELD® Texturetop®, SCOFIELD® ReviveTM Exterior Concrete Stain, or SCOFIELD® Formula OneTM Liquid Dye Concentrate.

APPLICATION

Distribute product with a pump garden sprayer fitted with a conical tip, followed by back rolling with a quality 3/8" knap roller. Roll in multiple directions to ensure
product penetrates into concrete cracks, joints, and pores. Take care not to create lap marks as they cannot be removed once the product has dried. Dried material
will be difficult to remove. Remove overspray immediately with hot water and detergent.

COVERAGE

Coverage will depend upon thinning, method of application, surface porosity, and the texture of the substrate. Full strength prime-coat coverage on flat finished concrete is typically 300–400 sq. ft./gal. (7.4–9.8 sq. m/L), and will yield a dry film thickness of 1.3–1.1 mils. Thinned with 1 pint of water per gallon, prime coat coverage is typically 450 sq. ft./gal., and will yield a dry film thickness of 0.85 mils. Porous, broom or textured finishes will require more sealer. As a topcoat or for second coat application, coverage of 600–800 sq. ft./gal. (14.8–19.6 sq. m/L) is typical.