Rust-Oleum - ROCEpoxy Primer

Achieve maximum surface protection by starting with a base coat of Rust-Oleum High Performance 9300 System Epoxy Primer.

Shipping and Returns

Shipping calculated at checkout. Rates vary by weight, size, and destination.

This product is drop shipped directly from Rust-Oleum’s warehouse in Illinois. Orders generally require 2–4 business days for processing before shipment.

As this item ships from the manufacturer, it may arrive separately from other products in your order.

Returns are accepted within 30 days if the product is unopened and in original condition. Customers are responsible for return shipping unless the item arrived damaged or there was an error with the order.

For drop shipped items like this, please contact us before returning so we can provide the proper return instructions.

This Item Ships Ground Only

Some of our products can literally take your breath away—which means they can’t take to the skies. This item is considered hazardous and must ship via ground only. Express and air delivery services are not available. It may take a little longer, but we’ll make sure it arrives safe and sound.

Material Safety and Tech Data Sheets

Learn more

Product Specification

ROCEpoxy High Solids Epoxy Primer HS9300 is a fast drying, two-component product designed to be part of a coating system for superior corrosion protection. This high solids, rust-inhibitive primer can be applied to clean, abrasive blasted steel or slightly rusted steel, masonry, or concrete. It can be top-coated with several Rust-Oleum High Performance products including ROCEpoxy Direct-to-Metal Epoxy Mastic 9100, ROCThane Fine Finish Urethane 9400 and ROCThane Direct-To-Metal Urethane Mastic 9800.

SURFACE PREPARATION

Remove all dirt, grease, oil, salt, and chemical contaminants by washing the surface with Krud Kutter® PRO Cleaner Degreaser. Rinse thoroughly with fresh water and allow to fully dry. Thoroughly cured previous coatings or new metal surfaces which are very smooth may require scuff sanding to maximize adhesion.

APPLICATION

Allow a 30-minute induction period before using. The container is short filled to allow for addition of activator. Do not activate more material than can be used in an 8-hour period. Apply only when air and surface temperatures are between 60-100°F (16-38°C) and surface is at least 5° above dew point.

Brush: Use a good quality natural or synthetic bristle brush.

Roller: Epoxy compatible lamb's wool or synthetic cover recommended.

Spray: Reference technical data.

Rust-Oleum - ROCEpoxy Primer

Product Specification

You may also like